Dynacord DC-PM600-3-MIG Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels, Power Amplifier 2x 1000W; USB Audio Interface,

Description

Specs:

Channels (Mono + Stereo): 4 + 4

Microphone Inputs (XLR): 6

Auxiliarys (MON, FX, AUX): 1 Pre, 1 Post, 1 Pre/Post switchable

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

Shipping, Returns & Warranty

into 2.66 Ω: 2 x 1600 W

into 4 Ω: 2 x 1250 W

into 8 Ω: 2 x 675 W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66 Ω: 2 x 1350 W

into 4 Ω: 2 x 1150 W

into 8 Ω: 2 x 650 W

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66 Ω: 2 x 1350 W

into 4 Ω: 2 x 1000 W

into 8 Ω: 2 x 600 W

Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel

into 4 Ω: 2 x 900 W

into 8 Ω: 2 x 450 W

Maximum Output Voltage, of power amplifier, 1 kHz, no load: 74 Vrms

THD, at 1 kHz, MBW = 80 kHz

MIC input to Master A L/R outputs, +16 dBu, typical: < 0.005%

POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

DIM 30, power amplifier, 3.15 kHz, 15 kHz: < 0.05%

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz: < 0.15%

Frequency Response, -3 dB, ref. 1 kHz

Any input to any Mixer output: 15 Hz to 70 kHz

Any input to Speaker L/R output: 20 Hz to 30 kHz

Crosstalk, 1 kHz

Amplifier L/R: < -85 dB

Channel to Channel: < -80 dB

Mute- & Standby-Switch attenuation: > 100 dB

Fader & FX/AUX/MON-Send attenuation: > 85 dB

CMRR, MIC input, 1 kHz: > 80 dB

Input Sensitivity, all level controls in max. position

MIC: -74 dBu (155 µV)

LINE (Mono): -54 dBu (1.55 mV)

LINE (Stereo): -34 dBu (15.5 mV)

CD (Stereo): -34 dBu (15.5 mV)

POWER AMP INPUTS: +8 dBu (1.95 V)

Maximum Level, mixing desk

MIC inputs: +11 dBu

Mono Line inputs: +31 dBu

Stereo Line inputs: +31 dBu

All other inputs: +22 dBu

All other outputs: +22 dBu

Input Impedances

MIC: 2 ㏀

CD In: 10 ㏀

All other inputs: > 15 ㏀

Output Impedances

Phones: 47 Ω

All other outputs (balanced/unbalanced): 150 Ω / 75 Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms: -130 dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -100 dBu

Master fader 0 dB, Channel fader down: -92 dBu

Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -82 dBu

Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω: 105 dB

Output Stage Topology, amplifier: Class D

Equalization

LO Shelving: ±15 dB / 60 Hz

MID Peaking: ±12 dB / 2.4 kHz

HI Shelving: ±15 dB / 12 kHz

Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10 dB / Q = 1.5 to 2.5

Filter

LO-CUT, mono inputs: f = 80 Hz, 18 dB/oct., switchable

Speaker Processing: LPN, switchable

Effects

Type: 2 x Stereo 24/48-bit multi effects processors

Effects presets: 100 Factory + 20 User, Tap-Delay

Remote control: Footswitch, MIDI

Display: 128 x 64 pixels, OLED

Digital Audio Interface

Channels: 4 In / 4 Out

AD/DA Conversion: 24-bit

Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz

PC Interface: USB2.0, Female Type B

Supported OS: See documentation

Peak Display: 6 dB before Clip

MIDI Interface: 5-pin DIN connector, In / Out

Output Power Control (Speaker Protection): Adjustable longterm RMS Limiter

Protection

Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R

Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF

Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature

Cooling: Continuous speed controlled Fans

Phantom Power, switchable: 48 V DC

Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz

Power Consumption, at 1/8 maximum output power, 4 Ω: 450 W

Safety Class: I

Ambient Temperature Limits: +5 °C to +40 °C (40 °F to 105 °F)

Dimensions (W x H x D), mm

With optional lid: 438.8 x 161.7 x 362.5

Rack-mount: 483 x 135.8 x 310.3 (7 HU)

Weight

Net Weight, without lid: 9.0 kg

Net Weight, with optional lid: 9.5 kg

Shipping Weight: 12 kg

Warranty: 36 months