Yamaha CZR10W 10" 2-Way Passive Loudspeaker System, White

The Yamaha CZR10W is a 2-way passive loudspeaker that will take your entertainment to the next level with FOH and floor monitoring.

This 2-way bi-ampable PA speaker boasts 1,400-watt power handling, a 43Hz-20kHz frequency range, and can tackle any application you throw at it. Great-sounding, custom-designed transducers deliver vivid, soaring highs and rafter-shaking low end. As a passive PA speaker, the CZR10 integrates with any configuration, thanks to its rotatable horn. It can also operate effectively as a stage monitor. This speaker can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. The CZR10 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

Custom-designed transducers
The Yamaha CZR10 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a die-cast aluminum frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the CZR10 delivers. The CZR10 isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction - even at cranked volumes.

Smart, ultra-flexible design
The CZR10 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90x60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the CZR10's constant directivity horn - its innovative design minimizes the roll-off that conventional horns often produce.

Sophisticated DSP processing
If you power the CZR10 with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. A PX Series amplifier and CZR10 are a match made in heaven. Yamaha PX Series amplifier sold separately.

Features:

• 2-way passive loudspeaker with 2" HF and 10" LF drivers
• Boasts 1,400-watt power handling and bi-amp capabilities
• 43Hz-20kHz frequency range with 127dB SPL
• Great-sounding, custom-designed transducers
• Rotatable horn allows vertical or horizontal mounting
• 90x60° dispersion from a vertical position
• Constant directivity horn supplies smooth, level coverage without roll-off
• Compatible with Yamaha PX Series amplifier processor tuning settings (amplifier sold separately)
• Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Specs

• Powered: No
• Power Configuration: 2-way Passive/Bi-amped
• LF Driver Size: 10" Woofer, 3" Voice Coil with Neodymium Magnet
• HF Driver Size: 2"
• HF Compression Driver
• Impedance: 8 ohms
• Power Rating: 700W Program
• Total Power: 1400W
• Peak Inputs: 2 x SpeakON (parallel)
• Frequency Range: 43Hz-20kHz (passive), 46Hz-20kHz (with DSP processing)
• Crossover Frequency: 2.5kHz
• Horizontal Coverage Angle: 90 Degrees
• Maximum Peak SPL: 127 dB SPL @ 1m
• Vertical Coverage Angle: 60 Degrees
• Enclosure Material: Plywood Cabinet with Polyurea Coating
• Mounting Options: Pole: 2 x 1.37" (35mm); Fly: 8 x M10, 2 x M8; Wedge
• Height: 21.1" (with feet)
• Width: 12.4"
• Depth: 13.6"
• Weight: 30.9 lbs.
• Country of Origin: Indonesia

The Yamaha CZR10W offers best-in-class SPL performance and allows vertical or horizontal mounting.