Dynacord DC-PM1000-3-UNIV Power Mixer, 6 Mic/Line + 4 Mic/Stereo Line Channels,Power Amplifier 2x 1000 Watt

• Channels (Mono + Stereo): 6 + 4
• Auxiliarys (MON, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post switchable
• Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
  • into 2.66 Ω : 2 x 1600 W
  • into 4 Ω: 2 x 1250 W
  • into 8 Ω: 2 x 675 W
• Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
  • into 2.66 Ω: 2 x 1350 W
  • into 4 Ω: 2 x 1150 W
  • into 8 Ω: 2 x 650 W
• Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
  • into 2.66 Ω: 2 x 1350 W
  • into 4 Ω: 2 x 1000 W
  • into 8 Ω: 2 x 600 W
• Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel
  • into 4 Ω: 2 x 900 W
  • into 8 Ω: 2 x 450 W
• Maximum Output Voltage, of power amplifier, 1 kHz, no load: 74 Vrms
• THD, at 1 kHz, MBW = 80 kHz
  • MIC input to Master A L/R outputs, +16 dBu, typical: < 0.005%
  • POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
  • DIM 30, power amplifier, 3.15 kHz, 15 kHz: < 0.05%
  • IMD-SMPTE, power amplifier, 60 Hz, 7 kHz: < 0.15%
• Frequency Response, -3 dB, ref. 1 kHz
  • Any input to any Mixer output: 15 Hz to 70 kHz
  • Any input to Speaker L/R output: 20 Hz to 30 kHz
• Crosstalk, 1 kHz
  • Amplifier L/R: < -85 dB
  • Channel to Channel: < -80 dB
  • Mute- & Standby-Switch attenuation: > 100 dB
  • Fader & FX/AUX/MON-Send attenuation: > 85 dB
  • CMRR, MIC input, 1 kHz: > 80 dB
• Input Sensitivity, all level controls in max. position
  • MIC: -74 dBu (155 μV)
  • LINE (Mono): -54 dBu (1.55 mV)
  • LINE (Stereo): -34 dBu (15.5 mV)
  • CD (Stereo): -34 dBu (15.5 mV)
  • POWER AMP INPUTS: +8 dBu (1.95 V)
• Maximum Level, mixing desk
  • MIC inputs: +21 dBu
  • Mono Line inputs: +41 dBu
  • Stereo Line inputs: +30 dBu
  • All other inputs: +22 dBu
  • All other outputs: +22 dBu
• Input Impedances
  • MIC: 2 ㏀
  • Insert Return: 3.3 KΩ
  • 2Track Return & CD In: 10 KΩ
  • All other inputs: > 15 KΩ
• Output Impedances
  • Phones: 47 Ω
  • All other outputs: 75 Ω
• Equivalent Input Noise, MIC input, A-weighted, 150 ohms: -130 dBu
  • Noise, Channel inputs to Master A L/R outputs, A-weighted
  • Master fader down: -97 dBu
  • Master fader 0 dB, Channel fader down: -91 dBu
  • Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -83 dBu
  • Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω: 105 dB
• Output Stage Topology, amplifier: Class D
• Equalization
  • LO Shelving: ±15 dB / 60 Hz
  • MID Peaking, mono inputs: ±15 dB / 100 Hz to 8 kHz
  • MID Peaking, stereo inputs: ±12 dB / 2.4 kHz
  • HI Shelving: ±15 dB / 12 kHz
  • Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz) ±10 dB / Q = 1.5 to 2.5
  • Filter
  • LO-CUT, mono inputs: f = 80 Hz, 18 dB/oct.
  • VOICE FILTER, mono inputs: switchable
  • FEEDBACK FILTER, MON 1/2: 70 Hz to 7 kHz, Notch, -9 dB
• Speaker Processing: LPN, switchable
• Effects
  • Type: Dual stereo 24/48-bit multi effects processors
  • Effects presets: 100 Factory + 20 User, Tap-Delay
• Remote control: Footswitch, MIDI
• Display: 128 x 64 pixels, OLED
• Digital Audio Interface
  • Channels: 4 In / 4 Out
  • AD/DA Conversion: 24-bit
  • Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
  • PC Interface: USB2.0, Female Type B
  • Supported OS: See documentation
  • Peak Display: 6 dB before Clip
  • MIDI Interface: 5-pin DIN connector, In / Out
• Output Power Control (Speaker Protection): Adjustable longterm RMS Limiter
• Protection
  • Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A
  • Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay,
  • Back EMF
  • Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
  • Cooling: Continuous speed controlled Fans
• Phantom Power, switchable in groups: 48 V DC
• Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz
• Power Consumption, at ⅛ maximum output power, 4 Ω: 450 W
• Safety Class: I
• Ambient Temperature Limits: +5 °C to +40 °C (40 °F to 105 °F)
• Dimensions (W x H x D), mm
  • With optional lid: 510.5 x 164.5 x 571.5
  • Rack-mount: 483.0 x 135.0 x 443.7
• Weight
  • Net Weight, without lid: 12.5 kg
  • Net Weight, with optional lid: 14 kg
  • Shipping Weight: 17 kg
• Warranty: 36 months

Power Mate EC Declaration of Conformity

PowerMate-3 Engineering Data Sheet

PowerMate-3 Owner's Manual (EN/DE)

PowerMate-3 Quick start

Dynacord Amplifiers, Digital Audio Matrices & Software Catalog

Shipping Information

• Free Shipping: All orders within the United States include free standard curb-side pickup shipping, delivered in 5-7 business days.
• Other Delivery Options:
  • Threshold Shipping: Delivered to your porch or garage.
  • White Glove Delivery: Delivered to your room of choice, includes minor assembly, and packaging removal (note: saunas excluded).
• Processing Times: Orders are processed within 1-2 business days. Tracking information will be provided within 24 hours of shipment.
• Out-of-Stock Products: You can order out-of-stock items. Estimated restock dates will be shared before we charge your card.

Damages During Transit

• Inspect your package upon delivery and report any visible damage within 24 hours, including photos of the box and product, to ensure quick resolution.

Returns & Refunds

• Return Eligibility: Items can be returned within 30 days if they are unopened, unused, and in their original condition.
• Restocking Fees: Returns are subject to a 25% restocking fee plus return shipping costs. Exchanges for other items may have fees waived depending on the product.
• Initiating a Return: Contact us for detailed return instructions. Customers bear return shipping costs unless the return is due to a defective product or a shipping error.
• Refund Processing: Approved refunds will be credited to your original payment method within 5-10 business days after the returned item is inspected.

Warranty Information

Most products include manufacturer warranties. For specific details, check the Warranty tab on this product page.

Price Match Guarantee

• Best Price Guarantee: We’ll beat any competitor’s price by $50 for items over $2,000.
• How to Claim: Submit proof of the lower price (e.g., screenshot, invoice, or email) for verification.

Disclaimer: The information above is a summary of our key policies. For full details, please refer to our comprehensive policies located in the footer of this page.