Allen & Heath AH-M-DX32-PRIME-IN-A DX32 PRIME Mic/line input module - 8 XLR Inputs for DX32 Expander

Inputs

• ADC 96kHz, 32-bit Delta-Sigma
• Mic/Line XLR Inputs Balanced XLR, +48V phantom power
• Mic/Line Preamp Fully recallable
• Input Sensitivity (dLive) -60 to +15dBu
• Input Sensitivity (SQ) -60 to +20dBu
• Analogue Gain (dLive) +5 to +60dB, 1dB steps
• Analogue Gain (SQ) 0 to +60dB, 1dB steps
• Pad -20dB Active PAD
• Maximum Input Level +38dBu (PAD in)
• Input Impedance >4kΩ (Pad out), >10kΩ (Pad in)
• Mic EIN -127.5dBu with 150Ω source
• Phantom Power indication Per socket, internal or external phantom power sensing, triggered at 24V
• Measured Prime in to AES out, 20-20kHz, minimum Gain, Pad out.
• Full Signal Dynamic Range 114.8dB
• Noise at 0dB gain -96.8dBu
• Frequency Response to AES output
• At 0dB gain 10Hz - 20kHz +0/-0.3dB
• At 30dB gain 10Hz - 20kHz +0/-0.3dB
• At 60dB gain 10Hz - 20kHz +0/-0.25dB
• THD+N (analogue in to AES out)
• 0.0009% @ +10dBu out 0dB gain
• 0.0009% @ +10dBu out 10dB gain
• 0.001% @ +10dBu out 20dB gain
• 0.0011% @ +10dBu out 30dB gain

Outputs

• DAC 96kHz, 32-bit Delta-Sigma
• Analogue XLR Outputs
• Output Impedance <60Ω
• Nominal Output +4dBu = 0dB meter reading
• Maximum Output Level +22dBu
• Residual Output Noise -94dBu (22-22kHz)
• THD+N -105dB (22-22kHz) @1kHz
• Crosstalk separation -94dBu (22-22kHz) @1kH

Limited One Year Manufacturer’s Warranty

Allen & Heath warrants the Allen &Heath -branded hardware product and accessories
contained in the original packaging ("Allen & Heath Product”) against defects in materialsand workmanship when used in accordance with Allen & Heath's user manuals, technical specifications and other Allen & Heath product published guidelines for a period of ONE (1) YEAR from the date of original purchase by the end-user purchaser ("Warranty Period").

This warranty does not apply to any non-Allen & Heath branded hardware products or any software, even if packaged or sold with Allen & Heath hardware.
Please refer to the licensing agreement accompanying the software for details of your rights with respect to the use of software (“EULA”).
Details of the EULA, warranty policy and other useful information can be found on the Allen & Heath website: www.allen-heath.com/legal.

Repair or replacement under the terms of the warranty does not provide right to extension or renewal of the warranty period. Repair or direct replacement of the product under the terms of this warranty may be fulfilled with functionally equivalent service exchange units.

This warranty is not transferable. This warranty will be the purchaser’s sole and exclusive
remedy and neither Allen & Heath nor its approved service centres shall be liable for any incidental or consequential damages or breach of any express or implied warranty of this product.

Conditions of Warranty

The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by Allen & Heath. The warranty does not cover fader wear and tear.

Any necessary adjustment, alteration or repair has been carried out by an authorised Allen & Heath distributor or agent.

The defective unit is to be returned carriage prepaid to the place of purchase, an authorised Allen & Heath distributor or agent with proof of purchase. Please discuss this with the distributor or the agent before shipping. Units returned should be packed in the original carton to avoid transit damage.

DISCLAIMER: Allen & Heath shall not be liable for the loss of any saved/stored data in
products that are either repaired or replaced.

Check with your Allen & Heath distributor or agent for any additional warranty information which may apply. If further assistance is required please contact Allen & Heath Ltd.

Any changes or modifications to the equipment not approved by Allen & Heath could void the compliance of the product and therefore the user’s authority to operate it.

Limited Manufacturer’s Warranty

Allen & Heath warrants the following Allen &Heath -branded hardware products and accessories ("Allen & Heath Product”) against defects in materials and workmanship for a period of THREE (3) YEARS from the date of original purchase by the end-user purchaser ("Warranty Period"):

• dLive Surfaces: S3000, S5000, S7000, C1500, C2500, C3500, CTi-1500
• dLive MixRacks: DM32, DM48, DM64, DM0, CDM32, CDM48, CDM64
• Avantis, Avantis Solo
• DX32 expander
• PRIME I/O modules
• AHM-16, AHM-32, AHM-64

All other Allen &Heath -branded hardware products and accessories ("Allen & Heath Product”) are warranted against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original purchase by the end-user purchaser ("Warranty Period").

This warranty does not apply to any non-Allen & Heath branded hardware products or any software, even if packaged or sold with Allen & Heath hardware.

Please refer to the licensing agreement accompanying the software for details of your rights with respect to the use of software/firmware (“EULA”).

Details of the EULA, warranty policy and other useful information can be found on the Allen & Heath
website: www.allen-heath.com/legal.

Repair or replacement under the terms of the warranty does not provide right to extension or renewal of the warranty period. Repair or direct replacement of the product under the terms of this warranty may be fulfilled with functionally equivalent service exchange units.

This warranty is not transferable. This warranty will be the purchaser’s sole and exclusive remedy and neither Allen & Heath nor its approved service centres shall be liable for any incidental or consequential damages or breach of any express or implied warranty of this product.

Conditions Of Warranty

The equipment is contained in the original packaging and has been used in accordance with Allen & Heath's user manuals, technical specifications and other Allen & Heath product published guidelines.

The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by Allen & Heath.

Any changes or modifications to the equipment not approved by Allen & Heath could void the compliance of the product and therefore the user’s authority to operate it.

Any necessary adjustment, alteration or repair has been carried out by an authorised Allen & Heath distributor or agent.

The warranty does not cover fader wear and tear.

The defective unit is to be returned carriage prepaid to the place of purchase, an authorised Allen & Heath distributor or agent with proof of purchase. Please discuss this with the distributor or the agent before shipping. Units returned should be packed in the original carton to avoid transit damage.

DISCLAIMER: Allen & Heath shall not be liable for the loss of any saved/stored data in products that are either repaired or replaced.
 

Check with your Allen & Heath distributor or agent for any additional warranty information which may apply. If further assistance is required please contact Allen & Heath Ltd.

Shipping Information

• Free Shipping: All orders within the United States include free standard curb-side pickup shipping, delivered in 5-7 business days.
• Other Delivery Options:
  • Threshold Shipping: Delivered to your porch or garage.
  • White Glove Delivery: Delivered to your room of choice, includes minor assembly, and packaging removal (note: saunas excluded).
• Processing Times: Orders are processed within 1-2 business days. Tracking information will be provided within 24 hours of shipment.
• Out-of-Stock Products: You can order out-of-stock items. Estimated restock dates will be shared before we charge your card.

Damages During Transit

• Inspect your package upon delivery and report any visible damage within 24 hours, including photos of the box and product, to ensure quick resolution.

Returns & Refunds

• Return Eligibility: Items can be returned within 30 days if they are unopened, unused, and in their original condition.
• Restocking Fees: Returns are subject to a 25% restocking fee plus return shipping costs. Exchanges for other items may have fees waived depending on the product.
• Initiating a Return: Contact us for detailed return instructions. Customers bear return shipping costs unless the return is due to a defective product or a shipping error.
• Refund Processing: Approved refunds will be credited to your original payment method within 5-10 business days after the returned item is inspected.

Warranty Information

Most products include manufacturer warranties. For specific details, check the Warranty tab on this product page.

Price Match Guarantee

• Best Price Guarantee: We’ll beat any competitor’s price by $50 for items over $2,000.
• How to Claim: Submit proof of the lower price (e.g., screenshot, invoice, or email) for verification.

Disclaimer: The information above is a summary of our key policies. For full details, please refer to our comprehensive policies located in the footer of this page.