Electro-Voice EVF-1152D/64-PIB 60 X 40 , 2-way Full-range fully Weatherized Loudspeaker, EVCoat

Electro Voice's EVH-1152D/64 PIB Premium 2 Way 60°x40° 2000W 15" Outdoor Rated PI Coaxial Horn Loaded Full Range Passive PA Speaker has dynamic protection circuit to protect again thermal overload.

The EVH family of models employs an unmatched combination of superior acoustic design and rigging, allowing vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF & EVH Series. Twenty-eight suspension points for use with rated eyebolts or EV-I cluster hardware provide low-cost, simple rigging solutions.

The Electro-Voice EVH-1152D/64 is a high-power, two-way horn-loaded coaxial loudspeaker system that can be used in a wide variety of applications where excellent intelligibility, wide bandwidth directivity control, and high efficiency are required in a compact, cost-effective package.

For high frequencies, the EVH-1152D/64 utilizes the DH7N, a high-output 3-inch titanium compression driver, coupled to a rotatable Constant Directivity 60° x 40° waveguide. Both the mid-bass and high frequency waveguides may be rotated to maintain uniform pattern control over the entire critical vocal range regardless of enclosure orientation. For low frequencies, the SMX2151 15-inch woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and an HF protection circuit for long-term reliability. This combination of technologies results in extended frequency response and excellent pattern control down to 500 Hz.

The EVH-1152D/64 features make it ideal for many fixed-install applications. The trapezoidal enclosure is constructed out of weather-resistant birch and coated with EVCoat for enhanced durability. For protection against outdoor elements, weatherized versions are available (PI and FG). The enclosure is built with 28 M10 suspension points for single hang (four (4) shoulder eyebolts included) or cluster arrays (optional HRK or VRK kits).

The innovative input panel provides Phoenix-style connectors (included in all models) and a dual gland nut cover plate (CDG included in PI and FG models). For convenience in temporary installation you may add a dual NL4 type connector cover plate (CDNL4). An external easy to access jumper card is provided with each loudspeaker to assist you in the selection of passive (standard shipping configuration) or biamp operation. An available 70.7/100 Volt internal transformer kit (TK-150) may be easily mounted to the input panel for use in distributed systems. No matter what the application and budget, all these features provide you with the tools to increase flexibility during system design to meet and support your customer's requirements with fewer items in inventory.

EVF and EVH loudspeakers feature precise acoustics and rigging design for easy to configure vertical and horizontal clusters as part of the solutions provided in the EV innovation family.

Features:

• 15" (381mm) LF driver in a horn-loaded coaxial loudspeaker enclosure
• Compression driver with 3" - titanium diaphragm, mounted on a 12" x 12" constant directivity horn with a 1.4" exit
• Very linear frequency response from 60 Hz to 17 kHz,
• Integrated crossover with an acoustic crossover frequency of 1300 Hz
• Rotatable HF Section Dispersion
• Rotatable Mid Band Dispersion
• Compact, trapezoidal-shaped cluster-enclosure; trapezoid angle: 15° per side
• 13-ply/ 18mm birch plywood; braced appropriately to prevent enclosure resonance with 28 suspension points
• Advanced 4th Order Crossover 24 db octave Slope with HF protection
• dynamic protection circuit for independent protection of both ways against thermal overload
• switchable bi-amp or passive operation:
• compact, trapezoidal-shaped,
• optional flying hardware
• Black textured paint
• Input phoenix panel to handle up to 10AWG connector
• Easy external operation mode selection switch
• ANSI /IEC 60529 - IP55
• EN54-24 Certified
• Maximum sustained humidity < 80%
• Salt content of normal air exposure <20%
• Stainless steel grill and stainless steel Fasteners

Specs

• Frequency response (-3 dB): 60 Hz to 17kHz
• Frequency response (-10 dB): 50 Hz to 20 kHz
• Nominal coverage (-6 dB): 60°H x 40°V
• Passive maximum long-term average powerhandling capacity (per ANSI/EIA RS-426A): 500 W / 1000W / 2000W
• Maximum long-term average power-handling capacity (per ANSI/EIA RS-426A) Bi-amped: LF - 400W / 1600W, HF - 75W / 300W
• Sensitivity Passive (1W / 1M): 105 dB
• Sensitivity Bi-Amped (LF / HF): 106 dB / 113 dB
• Max. SPL Passive: 138 dB
• Nominal impedance passive, Nominal impedance bi-amped LF / HF: 8
• Suspension: (28) M10 threaded suspension points
• Minimum Impedance: 6.0 Ohm
• Nominal Impedance (Passive): 8 Ohm
• HF Transducer: DH7N, 3" (76 mm) diaphragm compression driver
• Frequency Response (-3 dB): 60 Hz - 17 kHz
• Max. SPL/1m (calc): 138dB
• Coverage (Nominal -6 dB) H: 60°
• LF Transducer: SMX2151, 15" (381 mm) driver
• Crossover Frequency: 1300Hz
• Enclosure Material: 13-ply weather-resistant birch with EVCoat
• Grille: 6 GA powder-coated galvanneal with rotatable logo
• Sensitivity 1 W/1 m: 105dB
• Height: 30.26" (768.6mm)
• Width: 30.26" (768.6mm)
• Recommended High-Pass Frequency: 60Hz
• Depth: 26.78" (680.1mm)
• Weight Net: 145.73lbs (66.1kg)