Electro-Voice EVC-1152-95W 15" , 90x55 Indoor passive Speaker , White - Excludes Rigging Hardware

The Electro Voice EVC-1152-95W Two Way 90° x 55° 1400W 15" Passive PA Speaker makes modification easy with an internal landing pad for 70V/100V transformer mounting in the input panel.

EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVF, EVH, EVA, and EVU).

The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.

The EVC series is an extremely cost-effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 suspension points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG (6 mm). The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.

For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK-150 audio transformer. Adding a TK-150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. An EVC loudspeaker with a transformer installed sounds virtually identical to the same model without a transformer.

Features:

• 15" low frequency transducer using FEA optimized woofer
• 1.25" titanium compression driver with 1''-throat diameter
• Rotatable CD horn with labeled coverage angles
• Enhanced 4th Order Crossover with response-shaping equalization and high frequency protection resulting in acoustical crossover slope of 24 dB per octave or steeper
• Integrated crossover with an acoustic crossover frequency of 1,600 Hz
• Electrical compensation network that responds to the drive signal by modifying the response of an integral high-pass filter when an inline transformer is installed in the loudspeaker, in order to minimize transformer saturation and protect system electronics
• Compact, symmetrical, trapezoidal-shaped enclosure made of 15-mm plywood
• (8) M10 suspension points and optional flying hardware
• White textured paint
• Euro block input connectors, handling wire gauges up to AWG 10
• Input panel has an internal landing pad for 70V/100V transformer mounting
• ANSI / IEC 60529 - IP44
• Maximum sustained humidity 80%
• Salt content of normal air < 20%
• 18 GA powder-coated cold-rolled steel front grill backed with acoustically transparent fabric

Specs

• Frequency response (-3dB): 70 Hz - 21 kHz
• Frequency response (-10dB): 50 Hz - 25 kHz
• Nominal coverage Hor: 90° - rotatable
• Nominal coverage Ver: 55° - rotatable
• Crossover Frequency: 1600 Hz
• Axial Sensitivity (1W/1m): 98 dB
• Maximum Calc. SPL: 129 dB
• Power Handling: 350 W Cont / 1400 W Peak
• Nominal impedance: 8 Ohms
• Minimum impedance: 6.7 Ohms
• Connectors: Dual four-pin 10 AWG Phoenix / Euro Block screw-terminals
• Dimensions (H x W x D): (684 x 433 x 451) mm
• Weight max.: 25.0 kg
• Suspension: eight M10 Suspension Points, optional U Bracket or pan/tilt wall mount
• HF Transducer: DH-3
• LF Transducer: EVS-15M
• Grille: 18 GA cold-rolled steel with rotatable logo (18 GA stainless steel with hydrophobic cloth on PI models)
• Weight Net: 55.12lbs (25kg)
• Shipping Weight: 61.07lbs (27.7kg)
• Environmental Specs: IEC 60529, IP44 (IP55 for PI versions)
• Power Handling (Continuous / Peak): 350/700/1400W
• Connectors: Dual four-pin 10 AWG (6 mm) Phoenix/Euro Block screw-terminals
• Enclosure: 15mm weather-resistant plywood with EV Coat
• Dimensions (H x W x D): 684 x 433 x 451mm
• Passive crossover frequency: 1.6kHz
• Rec. high-pass frequency, 4th Order: 40 Hz for 8 Ohm (50 Hz with TK-150 transformer)